HP OneView for VMware vCenter User Manual
Page 49
3.
Click the Summary tab if necessary.
The Summary tab displays information about HP storage and includes a graphical
representation of that information.
For details about the colors used on this page, click Show Legend (.net client only). See
.
Figure 25 Summary tab legend
Viewing summary information
The Summary tab displays the following information about the selected host:
HP Storage Provisioned to Host
•
Volumes—Number of volumes available to the host from configured HP storage arrays and
whether any are thin-provisioned
•
HP Storage Provisioned—Amount of storage available to the host from configured HP storage
arrays
•
HP Storage Used—Amount of storage from configured HP storage arrays that is used by the
host
NOTE:
The HP Storage Used value can differ from the HP Storage Provisioned value if thin
provisioning or demand-allocated snapshots are used.
•
HP Storage ThP Savings—Amount of storage saved through the use of thin provisioning
•
Volumes overprovisioned—Number of over-provisioned volumes
Provisioned from Host to Virtual Machines
•
Current storage inventory—Number of datastores, RDMs, and unused volumes provisioned
to VMs
•
Host Provisioned Capacity—Total amount of storage available to the host, including HP storage,
local storage, and unmanaged disks
•
Host Used Capacity—Amount of storage used by the host
•
Host Available Capacity—Amount of unused storage on the host
•
Datastores overprovisioned—The number of over-provisioned datastores
HP Storage Arrays
This section lists the arrays that present disks to the selected host. For each array, move the cursor
over the status bar to view storage information. See
.
Using the Storage Module for vCenter
49