HP H-series Enterprise Fabric Management Suite Software - Manual (Page 121)

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide 121
• Configured Zoning—Restores all configured zone sets, zones, and aliases in the switch’s zoning
database, excluding the active zone set
• Nicknames—Restores the last saved nickname configuration
• Call Home—Restores all Call Home configuration and profile settings
• IP security configuration—Restores all profiles and associations
• RADUIS server—Restores all RADIUS server configurations
• Device security—Restores all security sets and groups, except group primary and secondary secrets
6. If you select the Configured Zoning or Full Restore option and the file contains zone sets, a dialog box
prompts you to activate one of those zone sets. Click Yes, and then select a zone set from the
drop-down list in the Select Zoneset to be Activated dialog box.
7. Click OK and view the results in the top pane of the Restore dialog box.
Restoring the factory default configuration
You can restore the switch and port configuration settings to the factory default values. To restore the
factory configuration on a switch, select Switch > Restore Factory Defaults. The factory default switch
configuration settings are listed in Table 23 .
Restoring the switch to the factory default configuration does not restore the account name and password
settings. The most current port license remains in effect. To restore user accounts, you must select the Reset
User Accounts to Default option in the maintenance menu. For information about maintenance mode and
the maintenance menu, see “Recovering a Switch” in the HP StorageWorks 8/20q Fibre Channel Switch
Installation and Reference Guide or the HP StorageWorks SN6000 Fibre Channel Switch Installation and
Reference Guide.
Table 23 Factory default configuration settings
Setting Value
Symbolic Name SN6000 FC Switch or 8/20q FC Switch
Administrative State Online
Domain ID 1
Domain ID Lock False
In-band Management True
Broadcast Support Enable
Resource Allocation Timeout
(R_A_TOV)
10000 milliseconds
I/O Stream Guard Auto
Device Scan Enabled True
Error Detect Timeout
(E_D_TOV)
2000 milliseconds
SNMP Enabled True
SNMP Proxy True
IP Address 10.0.0.1
FDMI Enabled True
FDMI HBA Entry Level 1000
Subnet Mask Address 255.0.0.0
Gateway Address 10.0.0.254