HP H-series Enterprise Fabric Management Suite Software - Manual (Page 107)

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabric Management Suite User Guide 107
Configuring SNMP
The Simple Network Management Protocol configuration includes properties and trap parameters plus
SNMP v3 manager and user parameters.
SNMP configuration and trap configuration parameters
SNMP configuration defines how authentication traps are managed. SNMP trap configuration defines how
traps are set. Choose from the tabs Trap1–Trap 5 to configure each trap.
To configure SNMP for switch or a stack:
1. Select a switch or a stack in the fabric tree.
2. Select Switch > SNMP > SNMP Properties to open the SNMP Properties dialog box ( Figure 60 ). For a
stack, select Stack > SNMP Properties.
3. If you selected a stack, choose a switch from the Initial Configuration drop-down list. Changes that you
make to this switch are distributed to the other switches in the stack.
4. Enter information for the SNMP configuration and SNMP trap configuration fields described in
Table 19 .
Authentication Algorithm with which to authenticate the source or destination:
• HMAC-MD5
• HMAC-SHA1
• HMAC-SHA256
• AES-XCBC-MAC
Authentication Key Key string to use for authentication
Encryption Algorithm with which to encrypt outbound data or decrypt inbound data:
• DES-CBC
• 3DES-CBC
• NULL
• BLOWFISH-CBC
• AES-CBC
• TWOFISH-CBC
Encryption Key Key string to use in encrypting or decrypting data
Table 18 Create IP Security Association dialog box fields (continued)
Field Description