beautypg.com

Replacing the access panel and bezel, 21 removing the blank plate in the bezel – HP D2D100 Backup System User Manual

Page 35

background image

Figure 20 Installing the internal tape drive (example shows a SCSI tape drive)

5.

Slide the tape drive fully into the bay until it is seated securely.

Replacing the access panel and bezel

1.

Remove the blank plate (1) at the top of the bezel.

Figure 21 Removing the blank plate in the bezel

2.

Insert the two hooks (1) on the right side of the bezel into the rectangular holes on the chassis.

Rotate (2) the bezel into place so that the three tabs on the left side of the bezel snap into the

slots on the chassis.

D2D Backup System

35

See also other documents in the category HP Storage: