Configuration (tape attach), Adding tape drives to the list, Upgrading tape drive firmware – HP D2D100 Backup System User Manual
Page 89: Copy/export/import (tape attach)
Configuration (Tape Attach)
This page allows you to view physical tape drives that are attached to the HP D2D Backup System. It
shows you the Vendor Name, Product ID, serial number and information about any cartridge loaded.
Click Select next to a specific tape drive to display more information about its serial number and
firmware revision. If there is a cartridge loaded in the tape drive, its bar code and cartridge size are
also displayed (these fields have hyphens if no cartridge is loaded).
Adding tape drives to the list
If you subsequently attach an additional external tape drive after power on, click Rescan to add it
to the list of devices.
NOTE:
If an attached tape drive is not detected, refer to “
Attached tape drive troubleshooting
Upgrading tape drive firmware
Firmware for supported HP Ultrium tape drives may also be updated from this page. Please refer to
www.hp.com/support
for details of the latest firmware for your HP Ultrium Tape Drive and download
required files to a location on your host machine before you use this page.
Copy/Export/Import (Tape Attach)
This page allows you to initiate a manual export/import or copy operation.
D2D Backup System
89