beautypg.com

41 removing the access panel, 42 removing the front bezel – HP D2D100 Backup System User Manual

Page 117

background image

Figure 41 Removing the access panel

6.

Press in on the two bottom tabs (1) on the side of the bezel so that they release from the chassis.

Press in on the upper tab on the side of the bezel so that it releases from the chassis. The bezel will

rotate out slightly (2). Pull the bezel (3) away from the front panel.

Figure 42 Removing the front bezel

7.

Remove the screw (1) from cover that secures the drives so that you can remove the failed drive. Pull

the cover (2) away from the drives.

D2D Backup System

117

See also other documents in the category HP Storage: