beautypg.com

Connect the hardware, 5 network and power connectors, Connecting and installing the hp d2d backup system – HP D2D100 Backup System User Manual

Page 23

background image

2 Connecting and installing the HP

D2D Backup System

In this chapter:

Connect the hardware

” on page 23

Supported network configurations

” on page 24

Software installation, discovery and configuration

” on page 26

Web browser settings

” on page 26

Connect the hardware

1. Network connector
2. Power connector

Figure 5 Network and power connectors
1.

Always use the supplied power cord to connect the HP D2D Backup System to the main power

supply. This HP-approved cord is appropriate for your specific geographic region.
For detailed safety information, see the Safety Guide on the HP StorageWorks CD-ROM.

2.

Use the supplied network cable to connect to a Gigabit network switch. 100 Base-T Ethernet will limit

performance; 10 Base-T Ethernet will severely limit performance. For example network topologies,

see

Supported network configurations

” on page 24.

D2D Backup System

23