beautypg.com

HP D2D100 Backup System User Manual

Page 103

background image

NOTE:

If you have used the Secret option on the iSCSI Initiator to enter an authentication

string, you must enter the same information on the Web Management Interface. See

“

iSCSI (Status)

” on page 77.

6.

On the Discovery tab, enter the IP address of the HP D2D Backup System to add it as a target portal

for the host. Do not change the Port; it should be 3260.

7.

Target devices have already been configured on the HP D2D Backup System for the host that failed,

so they will appear in the list on the Targets tab with a status of Inactive, if you are using the same

hostname and iSCSI initiator node name as the host that failed. Otherwise new devices will be

configured for this host. You must log on to the appropriate targets for your host. Remember that

D2D Backup System

103

See also other documents in the category HP Storage: