HP D2D100 Backup System - Manual (Page 34)

CAUTION:
The Ultrium half-height tape drive allows only 3 mm engagement of the screw into the tape
drive. To avoid damage to the tape drive, it is important to use the correct screws, which
have a slightly thicker head than general mounting screws, and the metal shims. The shims
prevent overtightening of the screws which may cause the drive mounts to sheer.
Figure 18 Selecting the correct screws
3. Attach the screws and shims to the tape drive as illustrated (1).
Figure 19 Attaching the screws and metal shims
4. Slide the half-height tape drive most of the way into the bay (1) and attach a spare power cable from
the server’s internal power supply to the power connector on the tape drive. Connect the device
cable (SCSI or SAS) to the appropriate ports on the HBA and tape drive (2).
NOTE:
Please refer to the documentation supplied with your tape drive for more information
about cabling.
34 Attaching a physical tape drive (optional)