HP XP Racks - Manual (Page 66)

OS Kernel
AIX V7.1 (Virtual I/O Server) #3 ioslevel 2.1.0.0 to 2.2.1.xx (where xx is a number)
#1
Every SP is applicable, unless otherwise specified.
#2
To set up a boot disk environment that uses Thunder 9500V series,
Hitachi AMS/WMS series, or Hitachi SMS series, use SP2 or a later service
pack.
#3
An environment in which the Secure by Default functionality is enabled
during installation of the OS is not supported.
#4
To set up a boot disk environment that uses a storage system of the
Thunder 9500V series, Hitachi AMS2000/AMS/WMS/SMS series, or
HUS100 series, apply SP2 or a later service pack.
Prerequisite Programs for HDLM
Before you install HDLM, confirm that the required programs written below
have been installed. For details about HTC_ODM and XP_ODM, contact the
storage system vendor.
• VisualAge C++ Runtime 5.0.0.0 or later, IBM XL C/C++ V7 Runtime
7.0.0.0 to IBM XL C/C++ V8 Runtime 8.0.0.0 or 8.0.0.6 or later (8.0.0.1
to 8.0.0.5 are not supported), IBM XL C/C++ V9 Runtime 9.0.0.1 or later,
or IBM XL C/C++ V10 Runtime 10.0.0.1 or later, or IBM XL C/C++ V11
Runtime 11.1.0.1 or later
Execute the following command, as applicable, to check the runtime
version:
For AIX 5L V5.3:
# lslpp -L xlC.aix50.rte
For AIX V6.1
# lslpp -L xlC.aix61.rte
For AIX V7.1
# lslpp -L xlC.aix61.rte
• HTC_ODM 5.0.52.1 or later
If you are using the following storage systems, use HTC_ODM 5.0.52.1 or
later:
¢
Hitachi AMS2000/AMS/WMS/SMS series
¢
Hitachi USP series (excluding the XP series)
¢
Lightning 9900V series (excluding the XP series)
¢
Thunder 9500V series
3-4
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for AIX®