HP XP Racks User Manual
Page 122

1
.
Log in to the standby host as the root user.
2
.
Execute the following command on the standby host to stop PowerHA.
# smitty cl_stop
3
.
Execute the following command on the standby host.
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
# clcmd stopsrc -s clconfd
# clusterconf -fu
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL07 or
later or AIX V7.1 TL01 or later:
# clctrl -stop -m node-name
4
.
Perform a new installation, upgrade installation, or re-installation of HDLM
on the standby host.
When performing a new installation of HDLM in a local boot disk
environment:
Perform the procedure described in
Stop Applications on page 3-35
of
Preparations for an Upgrade Installation or Re-installation of HDLM on
When performing a new installation of HDLM in a boot disk environment:
Perform the procedure described in
Management-Target Device on page 3-35
Upgrade Installation or Re-installation of HDLM on page 3-35
.
When performing an upgrade installation or re-installation of HDLM in a
local boot disk environment:
Perform the procedure described in
When Installing HDLM in a Local
Boot Disk Environment on page 3-36
of
Installation or Re-installation of HDLM on page 3-36
.
When performing an upgrade installation or re-installation of HDLM in a
boot disk environment:
Perform the procedure described in
When Installing HDLM in a Boot
Performing an Upgrade Installation
or Re-installation of HDLM on page 3-36
.
5
.
Execute the following command on the standby host.
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL06 or AIX
V7.1 with no TL:
# clusterconf -r hdiskxx
When the OS used in a PowerHA 7.1 environment is AIX V6.1 TL07 or
later or AIX V7.1 TL01 or later:
3-60
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for AIX®