HP XP Racks User Manual

Page 104

Intermittent Error Monitor : off

Dynamic I/O Path Control : off(10)

HDLM Manager Ver WakeupTime

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss

HDLM Alert Driver Ver WakeupTime ElogMem Size

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4000

HDLM Driver Ver WakeupTime

Alive x.x.x-xx yyyy/mm/dd hh:mm:ss

License Type Expiration

Permanent -

KAPL01001-I The HDLM command completed normally. Operation name

= view, completion time = yyyy/mm/dd hh:mm:ss

Even when cluster software is being used, the name of the cluster

software is not displayed in Support Cluster. However, the cluster

support function is operating normally.

From the execution result of the view operation, check that the correct

version of HDLM is installed.
If HDLM Version is x.x.x-xx, the installed version of HDLM is correct.

x.x.x-xx is the installed version of HDLM.

From the execution result of the view operation, check that the programs

are running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all

programs are running correctly.
If you are not using a virtual I/O server, the upgrade installation or re-

installation of HDLM is complete.
For details about the files to be inherited after the upgrade installation or

re-installation of HDLM, see

If you are using a virtual I/O server, define an hdisk as a virtual target

device.
Execute the following command on the virtual I/O server:

When creating an hdisk as a virtual target device:

$ mkvdev -vdev hdisk-name -vadapter virtual-SCSI-server-

adapter-name

When creating a logical device as a virtual target device:

$ mkvdev -vdev logical-volume-name -vadapter virtual-SCSI-

server-adapter-name

Execute the following command in the client logical partition to

reconfigure the device:
# cfgmgr

Execute the following command in the client logical partition to confirm

that the physical volume has been recognized as hdisk.
If the following message is displayed, then the physical volume (hdisk)

was recognized correctly.
# lsdev -Cc disk
hdisk1 Available Virtual SCSI Disk Drive

3-42

Creating an HDLM Environment

Hitachi Dynamic Link Manager User Guide for AIX®

This manual is related to the following products: