HP XP Racks - Manual (Page 126)

Create the /var/DLM directory, and then, in this directory, create the
license key file (dlm.lic_key). The following shows an example when
the license key is 123456789ABCDEF:
# mkdir /var/DLM
# echo "123456789ABCDEF" > /var/DLM/dlm.lic_key
¢
When the license key file has been provided
Store the license key file directly under the /var/tmp/ directory by
using the hdlm_license name.
/var/tmp/hdlm_license
The license key file or license key is not deleted after the installation.
8
.
Create an installation information settings file.
To use the sample file, copy it from the DVD-ROM to a directory on the
hard disk.
# cp -p /cdrom/HDLM_AIX/hdlmtool/instutil/
sample_installhdlm.conf /any-directory
You can change the sample_installhdlm.conf file name.
The following shows an example of copying the
sample_installhdlm.conf file, and then changing the file name to
install_set.conf:
# cp -p /cdrom/HDLM_AIX/hdlmtool/instutil/
sample_installhdlm.conf /any-directory/install_set.conf
For details about how to edit the installation information settings file,
which is used by the installhdlm utility, see Items To Be Defined in an
installation-information Settings File on page 7-27 .
9
.
Execute either of the following commands:
To execute installux.sh:
# /cdrom/installux.sh -f /any-directory/installation-
information-settings-file
To execute installdhlm:
# /cdrom/HDLM_AIX/hdlmtool/instutil/installhdlm -f /any-
directory/installation-information-settings-file
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host. When installation is
successful, the KAPL09211-I message is output.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
For an upgrade installation or re-installation of HDLM, the configuration of
the existing hdisks recognized as HDLM management-target devices is
inherited.
10
.
Unmount the DVD-ROM.
3-64
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for AIX®