HP XP Racks - Manual (Page 107)

# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXgd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
¢
When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXgd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the dlmrmdev utility without the -e parameter specified at
step 6 and then the KAPL09172-E message is displayed, the hdisk for the
device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 6 and then the KAPL09172-E message is displayed, the hdisk for the
device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 6.
If an upgrade installation ends with an error, HDLM might be removed. In
this case, proceed to step 13.
During installation, the KAPL09241-W message might be output. In this
case, installation of HDLM continues, but installation of HDLM components
has failed. After installing HDLM, resolve the problem according to the
KAPL09241-W message if necessary.
11
.
For a re-installation, execute the following command:
¢
When installing HDLM from the DVD-ROM
# /directory-in-which-the-DVD-ROM-is-mounted/installux.sh
or
# installp -aXFd /directory-in-which-the-DVD-ROM-is-mounted/
HDLM_AIX all
¢
When installing HDLM from the directory to which the DVD-ROM was
copied
# /directory-copied-from-DVD-ROM/installux.sh
or
# installp -aXFd /directory-copied-from-DVD-ROM/HDLM_AIX all
Even though a message asking you to restart the host is displayed during
installation, you do not have to restart the host.
If you execute the dlmrmdev utility without the -e parameter specified at
step 6 and then the KAPL09172-E message is displayed, the hdisk for the
device that is managed by HDLM still remains.
If you execute the dlmrmdev utility with the -e parameter specified at
step 6 and then the KAPL09172-E message is displayed, the hdisk for the
device that is managed by HDLM still remains, and its status is
Available. Re-execute the procedure in step 6.
Creating an HDLM Environment
3-45
Hitachi Dynamic Link Manager User Guide for AIX®