HP XP Racks - Manual (Page 109)

After executing the lspv command, if there is no hdisk other than the
one that constitutes rootvg, re-execute the procedure starting from step
14.
16
.
Execute the dlnkmgr command's view operation to check the status of
each program:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(rr)
Support Cluster :
Elog Level : 3
Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(60)
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 4000
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
Even when cluster software is being used, the name of the cluster
software is not displayed in Support Cluster. However, the cluster
support function is operating normally.
17
.
From the execution result of the view operation, check that the correct
version of HDLM is installed.
If HDLM Version is x.x.x-xx, the installed version of HDLM is correct.
x.x.x-xx is the installed version of HDLM.
If the KAPL01012-E message is displayed, the HDLM device has not been
configured. Re-execute the procedure starting from step 14.
18
.
From the execution result of the view operation, check that the programs
are running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
programs are running correctly.
If you are not using a virtual I/O server, the upgrade installation or re-
installation of HDLM is complete.
For details about the files to be inherited after the upgrade installation or
re-installation of HDLM, see Table 3-11 List of Files Inherited During an
Upgrade Installation or Re-installation on page 3-36 .
19
.
If you are using a virtual I/O server, define an hdisk as a virtual target
device.
Creating an HDLM Environment
3-47
Hitachi Dynamic Link Manager User Guide for AIX®