HP XP Racks - Manual (Page 286)

Prevents the confirmation message from being displayed when the utility
is executed.
-o
Displays the current value set for the reservation policy.
-h
Displays the format of the dlmchpdattr utility.
Notes
• Before you execute the dlmchpdattr utility, stop all application processes
that access HDLM-managed devices.
• Before you execute the dlmchpdattr utility, make sure that no path
errors are occurring. If there are any errors, the dlmchpdattr utility
might end with an error.
• If you cancel the execution of the dlmchpdattr utility by pressing Ctrl +
C, the KAPL10571-I message might be output depending on the timing of
the cancellation. This message signifies that the setting change was not
successful. If this message is output, re-execute the dlmchpdattr utility
with the same parameters specified. To return the settings to their
previous state, make sure that the above setting change was successful,
and then execute the dlmchpdattr utility with the original parameters
specified.
Examples
In the following example, the utility changes the default hdisk reservation
policy to no_reserve:
# /usr/DynamicLinkManager/bin/dlmchpdattr -a
reserve_policy=no_reserve
KAPL10579-I The HDLM default values will be changed. Is this OK?
[y/n]:y
KAPL10571-I The dlmchpdattr utility completed successfully.
In the following example, the utility displays the current default hdisk
reservation policy:
# /usr/DynamicLinkManager/bin/dlmchpdattr -o
uniquetype = disk/fcp/Hitachi
reserve_policy : no_reserve
KAPL10571-I The dlmchpdattr utility completed successfully.
In the following example, the utility displays Help:
Usage : dlmchpdattr {-a Attribute=Value [Attribute=Value ...]
[-u { HTC | XP }] [-A] [-s] | -o | -h}
Attributes
reserve_policy={ PR_exclusive | no_reserve }
max_transfer=Numeric
queue_depth=Numeric
rw_timeout=Numeric
7-14
Utility Reference
Hitachi Dynamic Link Manager User Guide for AIX®