HP XP Racks - Manual (Page 308)

#4
If you want to enable intermittent error monitoring, specify this key after
specifying the auto_failback and auto_failback_interval keys.
#5
The checking interval can be set regardless of whether the dynamic I/O
path control function is enabled or disabled.
The following shows an example of an edited installation information settings
file.
[INSTALLATION_SETTINGS]
installfile_location=/dev/cd0
logdir=/var/tmp
licensekeyfile=/var/tmp/hdlm_license
licensekey=/var/DLM/dlm.lic_key
driver_config=y
restart=n
[DISK_DEFAULT_SETTINGS]
reserve_policy=PR_exclusive
[ODM_SETTINGS]
odm_lun_reset=off
odm_online_e_io_block=off
odm_npiv_option=off
[ENVIRONMENT_SETTINGS]
load_balance=on
load_balance_type=exlio
load_balance_same_path_use_times=20
lbex_usetimes_limit=100
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=60
intermittent_error_monitor=off
# intermittent_error_monitor_interval=210
# intermittent_error_monitor_number=3
dynamic_io_path_control=off
dynamic_io_path_control_interval=10
Note:
¢
If a hash mark (#) is placed at the beginning of a line in the
installation information settings file, that line is assumed to be a
comment.
¢
If you do not want to specify a key, enter a hash mark (#) at the
beginning of the line that defines that key.
7-36
Utility Reference
Hitachi Dynamic Link Manager User Guide for AIX®