HP XP Racks - Manual (Page 134)

Function Default value Recommended value
30-minute check interval The recommended checking
interval depends on the
operating environment.
Automatic failback on
60-minute check interval The recommended checking
interval depends on the
operating environment.
Intermittent Error
Monitor
off on
The recommended checking
interval depends on the
operating environment.
Dynamic I/O path
control
#
off
10-minute check interval off
The recommended checking
interval depends on the
operating environment.
Logging level 3: Collects all the error
information for the
"Information" level or higher
3: Collects all the error
information for the
"Information" level or higher
Trace level 0: Do not output trace files 0: Do not output trace files
File size for the Error
log
9900 (KB) 9900 (KB)
Number of files for the
Error logs
2 2
File size for trace
information
1000 (KB) 1000 (KB)
Number of files for trace
information
4 4
Collection of audit log
data
off The recommended value
depends on the operating
environment.
Set on, if you want to collect
audit log data.
Audit log facility user local0 to local7
#
This function is applied only when Hitachi AMS2000 series, or HUS100
series storage is used.
Setting Up Load Balancing
You can select whether to enable load balancing.
The following is an example command to set load-balancing.
# /usr/DynamicLinkManager/bin/dlnkmgr set -lb on -lbtype exlio
Set it to on to enable load balancing. Otherwise, set it to off. When you set
on, specify one of the following algorithm values after the -lbtype option:
3-72
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide for AIX®