Canon PIXMA Pro9000 Mark II - Manual (Page 291)

The solid lines represent the paper size, and the translucent areas represent the amount of
extension.
Important
• When Amount of Extension is set to Large, the back of paper may become stained.
• When Amount of Extension is set to Small or None, margins may appear depending
on the size of the paper.
Adjust Print Position
If the image on the printed sticker or disc label (CD/DVD/BD) is out of position, you can adjust the
print position. You can adjust the print position in 0.01 inch or 0.1 mm increments within the following
ranges.
Stickers: -0.08 inch (-2.0 mm) to +0.08 inch (+2.0 mm)
Disc Label (CD/DVD/BD): -0.2 inch (-5.0 mm) to +0.2 inch (+5.0 mm)
Vertical
You can adjust the print position in the vertical direction.
Set a positive value to move upward or set a negative value to move downward.
Horizontal
You can adjust the print position in the horizontal direction.
Set a positive value to move left or set a negative value to move right.
291