Commands descriptions, Pjl output tray, Pcl output tray – Brother HL-2170W User Manual
Page 520: Ps output tray, Ps output tray command
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4
3.1.
Commands Descriptions
3.1.1.
PJL output tray
Format
@PJL SET/DEFAULT OUTBIN=TrayName
Parameter
TrayName*
FINISHER:
Select the tray of the Finisher/Stapler unit
Default = ALLSTACKER
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.2.
PCL output tray
Command
Esc&l#G (27)(38)(108)#(71) <1Bh><38h><6ch>#<47h>
Parameter
# denotes the output tray.
100
:
Select the Finisher/Stapler unit.
Default = 1
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
The PJL OUTBIN command is ignored when this command is executed.
3.1.3.
PS output tray
Command
<>setpagedevice
Parameter
#
3:
Select the Finisher/Stapler unit.
Default = 0
Explanation
This command selects the Finisher/Stapler unit.
This command is ignored when the Finisher/Stapler unit is not available.
<>setpagedevice
- HL-1670N HL-6050D HL 5250DN HL-5070N HL-2460 HL-6050DN HL-2150N HL 2700CN HL-2130 HL-S7000DN HL-3040CN HL 1650 HL-6050 HL-5240 HL-5240L HL-1470N HL 3070CW HL 5170DN HL-3450CN HL-3140CW HL 5470DW HL-5140 HL-5440D HL-7050 HL-2240 HL-5040 HL-4070CDW HL-1870N HL-1110 HL-1850 HL 4150CDN HL-8050N HL 5450DN HL 5370DW HL-5050 HL-2140 HL 1270N HL-2600CN HL-6180DW HL-5350DN HL-4050CDN HL-2070N HL-3260N HL-5150D HL-5280DW HL-3170CDW HL-4570CDW HL-3150CDW HL 4040CN HL-4140CN HL 2240D HL 2270DW HL-1250 HL-7050N HL 5340D HL-2250DN HL-1450 HL-L9200CDWT HL-1112 HL-5270DN HL-5450DNT HL-L8250CDN HL 4570CDWT HL-5380DN HL-6180DWT HL-L8350CDW HL-4040CDN HL-L8350CDWT HL-2230 HL-5470DWT HL 2220 HL-1110E HL-1112E