Brother HL-2170W - Manual (Page 371)

CHAPTER 9 HP-GL - 23
DR - Relative direction
DR [ run, rise ] [;]
run : X direction component
rise : Y direction component
 A percentage of the distance in the X and Y directions between P1 and P2 is used as the units
 Specifies the character plot direction.
 Values for the run and rise are clamped real numbers.
 The instruction is ignored when values for both run and rise are 0.
 When the parameter field is omitted, the default value (horizontal direction) is used.

run=70%
rise = 60%
(70,0)
(0,60)
(0, 100)
(0, 100)
(100, 100)
CP - Character plot
CP X,Y [;]
X ; the number of text spaces the pen position is moved.
Y ; the number of text lines the pen position is moved.
 Moves the cursor the specified number of characters.
 Values for X and Y are clamped real numbers.
 When the parameter field is omitted, the cursor is not moved along the X-axis but it is moved 1 character in
the negative direction along the Y-axis (identical to executing CP 0, -1;).
X increment
Y increment
Current position
10 '*** CPEX ***
20 LPRINT "DF;SP1;PA1000,3000;PDPR3000,0;PU;PR-3000,0;"
30 LPRINT "CP5,.55;LBABOVE THE LINE";CHR$(3);"PA2000,3000;"
40 LPRINT "XT;CP0,-1.15;LBBELOW THE LINE";CHR$(13);CHR$(10);"AND
WITH A NEAT";CHR$(3)
50 LPRINT "CP;LBMARGIN";CHR$(3)
60 END
SI - Set absolute character size
SI [ width, height ] [;]
width : the width in centimeters of printed characters
height : the height in centimeters of printed characters
 Specifies the size of characters to be plotted.
 Values for width and height are clamped real numbers.
 When the parameter field is omitted, the default values are used (width: 0.1879 cm, height: 0.2690 cm).