Brother HL-2170W - Manual (Page 513)

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 6
3.1.2. PJL mailbox protection & bin number setting
Format
@PJL SET/DEFAULT MAILBOXPROTECT=TrayNumber
Parameter
TrayNumber
 Lower unit: #1 to 5 from bottom to top
 Lower unit + Upper unit: #1 to 10 from bottom to top
#1 to 4 from bottom to top
Default = 0
Explanation

This command sets the bins with numbers larger than the TrayNumber specified as mailbox use only. They
cannot then be used for either stacker or sorter functions.
 If the bin number is set to 0, the mailbox protection is released, then all bins can be used for stacker and
sorter functions.
 If the bin number is set out of the effective range, this command is ignored.
Setting type Effective range

MX not installed 0

Lower unit installed 0, 1  5

Lower & upper unit installed 0, 1  10
Setting type Effective range

MX not installed 0

MX installed 0, 1  4
 The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.3. PJL avoidance of mailbox bin full
Command
@PJL SET/DEFAULT AVOIDMAILBOXFULL=ON/OFF
Parameter
ON/OFF

OFF: Paper is ejected to the printer face-down output tray when the specified tray is full.
 ON: Paper is not ejected to the printer face-down output tray even when the specified tray is full.
Default = OFF
Explanation

When paper is ejected into a bin specified by a setting command which limits the bin selection, this
command selects whether to eject automatically paper to the printer face-down output tray or not when the
specified bin is full.
 The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.