Brother HL-2170W - Manual (Page 274)

CHAPTER 5 PJL - 70
STORAGECONFIG The information of the memory device (HL-2460/3260N/1650/1670N/
7050/1850/1870N/5040/5050/5070N/5140/5150D/5170DN/6050/
6050D/6050DN/8050N/2070N/5240/5250DN/5270DN/5280DW/
4040CN/4050CDN/4070CDW/2140/2150N/2170W/5340D/5350DN/53
70DW/5380DN/3040CN/3045CN/3070CW/3075CW/2130/2240D/2250
DN/2270DW/4140CN/4150CDN/4570CDW/
5440D/5450DN/5470DW/6180DW/S7000DN/3140CW/3150CDW/315
0CDN/3170CDW/1110/1111/1112/1118/L8250CDN/L8350CDW(T)/L
9200CDW(T))
7.5.1. ID category
The application can use @PJL INFO ID command to find out the printer model name. As the features of the
printer may be changed by future revisions, the application should check them by using the @PJL INFO
CONFIG
command.
Example
The application sends the following command to the printer :
%-12345X@PJL
@PJL INFO ID
%-12345X
The printer sends back the answer for the above INFO command if the printer name is HL-1660e:
@PJL INFO ID
"Brother HL-1660e"
7.5.2. CONFIG category
The application can use @PJL INFO CONFIG command to have the printer return a list of printer
configuration information. The list consists of the information on paper sources, paper sizes, languages,
USTATUS
(unsolicited status) commands, font sources, RAM size, number of lines and characters on the
LCD supported by the printer, with the format of the number of available types and/or the description of
each type. The printer sends back a list of multiple information for one @PJL INFO CONFIG command.
Syntax:
@PJL INFO CONFIG
Response Syntax:
@PJL INFO CONFIG
feature[=value][value feature information]
[returned option[ attribute] ]
...
...
...
...
feature[=value][value feature information]
[returned option[ attribute] ]
Parameters
Parameter Range of Characters Description