beautypg.com

Command reference list, Commands descriptions, Pjl output tray & mode setting – Brother HL-2170W User Manual

Page 512

background image

APPENDIX D REFERENCE LIST OF MX-2000/4000/5000/7000 SERIES UNIQUE COMMANDS - 5

3.

COMMAND REFERENCE LIST

This section describes the specific commands as listed below used to support the functions of the Mailbox unit.

1) PJL output tray & mode setting

2) PJL mailbox protection & bin number setting

3) PJL avoidance of output bin full

4) PCL output tray setting

5) PS output tray & mode setting

6) PS mailbox protection & bin number setting

For the details on each command, refer to the following sections.

3.1.

Commands Descriptions

3.1.1.

PJL output tray & mode setting

Format

@PJL SET/DEFAULT OUTBIN=TrayName

Parameter
TrayName*

UPPER:

Select the printer face-down output tray.

OPTIONALOUTPUTBIN1:

Select the #1 bin of the Mailbox unit.

OPTIONALOUTPUTBIN2:

Select the #2 bin of the Mailbox unit.

OPTIONALOUTPUTBIN3:

Select the #3 bin of the Mailbox unit.

OPTIONALOUTPUTBIN4:

Select the #4 bin of the Mailbox unit.

OPTIONALOUTPUTBIN5:

Select the #5 bin of the Mailbox unit. (except HL-3260)

OPTIONALOUTPUTBIN6:

Select the #6 bin of the Mailbox unit (except HL-3260)

OPTIONALOUTPUTBIN7:

Select the #7 bin of the Mailbox unit. (except HL-3260)

OPTIONALOUTPUTBIN8:

Select the #8 bin of the Mailbox unit. (except HL-3260)

OPTIONALOUTPUTBIN9:

Select the #9 bin of the Mailbox unit. (except HL-3260)

OPTIONALOUTPUTBIN10:

Select the #10 bin of the Mailbox unit. (except HL-3260)

ALLSTACKER:

Select the stacker function. **

ALLSORTER:

Select the sorter function. **

* = The tray names are compatible with the HP tray naming.
** = These are unique tray names (parameters) for the HL-2060/2460/3260/7050.
Default = ALLSTACKER

Explanation

This command selects the specified output tray and output mode, trays defined as Mailboxes are numbered

from the bottom of the unit upwards

This command is ignored when there is no specified tray.

The ALLSTACKER and ALLSORTER parameters are executed for all output trays other than the ones which

are defined and protected as mailboxes. (Refer to Section 3.1.2 'PJL mailbox protection & tray number
setting'.)

The difference between the SET and DEFAULT selection and the effective period of this setting follow the

PJL specifications.

This manual is related to the following products:
See also other documents in the category Brother Printers: