NORD Drivesystems BU0220 - Manual (Page 82)

PROFIBUS DP – Supplementary manualfor NORD Frequency Inverter SK 2xxE
82 Subject to technical amendments BU 0220 GB-0912
8.2.3.2 M12 round plug connector (cable connector)
The following plug connectors are recommended by Getriebebau NORD GmbH. Plug connectors with a so-
called Part No. can also be supplied by Getriebebau NORD GmbH.
M12 connector
B coded
Supplier Name
Article No. / Part No.
straight angled
MURR Elektronik M12 plug, 7…8.8mm, 3-pin, cutting
type, IP67, shielded 7000-14201-0000000 /
Part. No. 275130073
---
MURR Elektronik M12 plug, 6...8mm, 2-pin, screwed,
IP67, shielded
7000-14005-0000000 ---
Franz Binder GmbH M12 plug, 6...8mm, 5-pin, screwed,
IP67,
99 1437 810 05
99 1437 820 05 /
Part. No. 275130074
M12 socket
B coded
Supplier Name
Article No. / Part No.
straight angled
MURR Elektronik M12 plug, 7...8.8mm, 3-pin, cutting type,
IP67, shielded 7000-14221-0000000 /
Part. No. 275130075
---
MURR Elektronik M12 socket, 6…8mm, 2-pin, screwed,
IP67, shielded
7000-14025-0000000 ---
Franz Binder GmbH M12 socket, 6…8mm, 5-pin, screwed,
IP67,
99 1436 810 05
99 1436 820 05 /
Part. No. 275130074
If required, ready-made profibus cables of various lengths can be obtained from the manufacturers listed here.
NOTE
For preference, pre-assembled Profibus cables and connection components should be
used.
For certain applications, vibration-proof round plug connectors should be used.
A-Leitung/
A cable
B-Leitung/
B cable
A-Leitung/
A cable
B-Leitung/
B cable