1 overview of the profibus dp modules, Overview of the profibus dp modules – NORD Drivesystems BU0220 User Manual
Page 15
BU 0220 GB-0912
Subject to technical amendments
15
2.1.1
Overview of the PROFIBUS DP modules
Bus Module
Description
Data
Profibus module
SK CU4-PBR
Part No. 275271000 (IP20)
This option enables control of the SK 2xxE via
PROFIBUS DP.
This option is integrated into the connection unit of
the frequency inverter.
Protocol:
DP-V0 (cyclical data traffic)
DP-V1 (acyclic data traffic)
Baud rate:
up to 12 MBaud
Connection:
16-terminal screw terminal bar
2x digital inputs:
Low: 0-5V, High: 11-30V
System bus
Profibus module
*)
SK TU4-PBR(-C)
Part No. 275281100 (IP55)
Part No. 275281150 (IP66)
This option enables control of the SK 2xxE via
PROFIBUS DP.
This option is installed externally to the frequency
inverter.
According to the installation location, at least one
"BUS connection unit"* is required.
Protocol:
DP-V0 (cyclical data traffic)
DP-V1 (acyclic data traffic)
Baud rate:
up to 12 MBaud
Connection:
36 pin spring terminal bar of the
“BUS connection unit” *
4x digital inputs:
Low: 0-5V, High: 11-30V
2x Digital outputs:
0/24V
System bus
Profibus module with M12
*)
SK TU4-PBR-M12(-C)
Part No. 275281200 (IP55)
Part No. 275281250 (IP66)
This option enables control of the SK 2xxE via
PROFIBUS DP.
This option is installed externally to the frequency
inverter.
According to the installation location, at least one
"BUS connection unit"* is required.
As SK TU4-PBR, but with:
6x M12 socket for the connection
of up to 4 sensors and 2
actuators via 5 pin M12 round
plug connectors (A coded)
Connection unit for TU4
SK TI4-TU-BUS
Part No. 275280000 (IP55)
Part No. 275280500 (IP66)
The connection unit is always required in order to
use an external technology unit (SK TU4-...). This
implements the mechanical and electrical
connection of the Technology Unit to the SK 2xxE
or the wall-mounting kit.
Connection:
36 pin spring terminal bar
36x 2,5mm
2
AWG 26-14
Spring terminals
TU4 Wall-mounting kit
SK TIE4-WMK-TU
Part. No. 275274002
With the wall mounting kit, a technology unit can be
used/installed separately from the SK 2xxE.
*)
in order to use the TU4 modules, a suitable SK TI4-TU-BUS connection unit must always be available!