Milestone Smart Client 3.6 - Manual (Page 87)

Milestone XProtect Smart Client 3.6; User’s Manual
www.milestonesys.com Page 87 Camera Position Messages
• No motion: Indicates that motion is currently not detected in the camera’s images; the
images you see will not be updated until there is motion. This message will only appear if
the surveillance system administrator has specified that images should only be updated
when there is motion; a feature which can help reduce server load and bandwidth
consumption. Consult your surveillance system administrator if in doubt.
• Not connected: Indicates that it is not possible to connect to the camera, for example
because the camera itself is disconnected from the network. Consult your surveillance
system administrator if in doubt.
• Not initialized: Indicates that the camera is not in an operative state. Consult your
surveillance system administrator if the problem persists.
• The server has encountered a database problem: Indicates that a database problem
has occurred on the surveillance server. Consult your surveillance system administrator,
who will have access to tools for diagnosing surveillance server database problems.
• The server has lost connection to the camera: Indicates that the surveillance server
has lost connection to the camera. This may be a temporary issue, for example due to
maintenance. Consult your surveillance system administrator if in doubt.
• The server is running out of disk space: Indicates that limited disk space is available on
the surveillance system server. If more disk space is not made available on the surveillance
system server, recording will be affected. Consult your surveillance system administrator.