Badger Meter SRD/SRI Valve Positioners - Manual (Page 88)

High High Alarm
This is a 4-byte real, expressed as percentage of stroke . When the valve position exceeds this parameter, the High High Alarm
status bit in the secondary device status will be set . Default for this parameter is 110% .
7 6 5 4 3 2 1 0
Control Diff LoLo Alarm HiHi Alarm Low Alarm High Alarm NOT USED More Status
Failsafe
Timeout
Low Alarm
This is a 4-byte real, expressed as percentage of stroke . When the valve position exceeds this parameter, the Low Alarm status
bit in the secondary device status will be set . Default for this parameter is -10% .
7 6 5 4 3 2 1 0
Control Diff LoLo Alarm HiHi Alarm Low Alarm High Alarm NOT USED More Status
Failsafe
Timeout
Low Low Alarm
This is a 4-byte real, expressed as percentage of stroke . When the valve position exceeds this parameter, the Low Low Alarm
status bit in the secondary device status will be set . Default for this parameter is -10% .
7 6 5 4 3 2 1 0
Control Diff LoLo Alarm HiHi Alarm Low Alarm High Alarm NOT USED More Status
Failsafe
Timeout
Cycle Count Limit
This is a 4 byte integer parameter . Its value contains the number of cycles necessary to trigger an alarm condition . When the
cycle count equals or exceeds this number, an alarm bit is raised in the SRD991 additional status . Default value is 90,000,000 .
7 6 5 4 3 2 1 0
NOT USED
Trim
Feedback
Trim Loop Cycle Count Travel Sum Config invalid Temp low Temp high
Travel Sum Deadband
The default for this 4-byte real is 1% .
Travel Sum Limit
This is a 4-byte integer parameter . The parameter default is 90,000,000 .
7 6 5 4 3 2 1 0
NOT USED
Trim
Feedback
Trim Loop Cycle Count Travel Sum Config invalid Temp low Temp high
Control Difference Limit
Default for this parameter is 5% . This is a 4-byte real, expressed as a percentage .
7 6 5 4 3 2 1 0
Control Diff LoLo Alarm HiHi Alarm Low Alarm High Alarm NOT USED More Status
Failsafe
Timeout
Additional Status
Page 88 August 2014 POS-UM-00011-EN-02