Badger Meter SRD/SRI Valve Positioners - Manual (Page 34)

Last Calibration Date
This field helps you track the last date of calibration of the intelligent device . Used in conjunction with the calibration
information field, it provides ample space to record the latest data so that future maintenance can be planned and work can
be checked . It accepts dates in the normal format, 15-May-97, and converts them to a packed 2-byte field:
The Calibration Date is initially set at the factory during the positioner build, prior to shipping .
Parameters Page
Fill in the necessary reference information, comments and notes in the
Parameters page .
Information, such as Message 1, Fabrication Number (Fab. Number),
Hardware-revision (HW-Rev.) and the Instrument Model Code cannot be
modified .
All white fields can be changed, such as Message 2, Message 3,
Calibration Information, Maintenance Information, ECEP,as well as the
Serial Numbers for the Actuator and the Valve .
Instrument Model Number
The instrument model number is factory preset and not changeable . It encompasses 14 characters maximum .
Actuator Model Number
The positioner may be mounted on a different actuator in the field, so the actuator model or serial number is user definable .
Up to 14 characters may be entered .
Valve Model Number
The positioner may be mounted on a different valve in the field, so the valve model or serial number is user definable . Up to
14 characters may be entered .
Message 1
This is a 14-byte field that is a pure scratch area . It is initialized to "Message 1" and the user can write anything at all into it . It is
intended for a short note that needs to be written into the positioner EPROM .
Message 2
This is a 14-byte field that is a pure scratch area . It is initialized to "Message 2" and the user can write anything at all into it . It is
intended for a short note that needs to be written into the positioner EPROM .
Message 3
This is a 14-byte field that is a pure scratch area . It is initialized to "Message 3" and the user can write anything at all into it . It is
intended for a short note that needs to be written into the positioner EPROM .
Maintenance Information
This is a 14-byte field that is a pure scratch area . It is initialized to "Message 4" and it is user definable . It is intended for a
short note that needs to be written into the positioner EPROM that reflects when and who did the last maintenance on
the positioner .
Configuration / Parameter
Page 34 August 2014 POS-UM-00011-EN-02