SHIMPO CAG-2000 1 Channel - Manual (Page 7)

5
(8) Mode LEDs
Indicate the current mode and the mastering result. The
relationship between the LED color and the mode or mastering
result is as shown in Table 4-4.
Table 4-4. LED colors and conditions indicated.
LED name LED color Mode or condition
Orange Set mode SET
Green Change program mode
Orange Master mode
Flashing red Mastering result NG
MAS
Alternately red and orange Master mode,
Mastering result NG
(9) Control keys
 Left arrow key
Mode Keying Condition
Measure Press 2 sec. Mode is changed to set mode.
Set Press once. Set item can be selected.
 Right arrow key
Mode Keying Condition
Measure Press 2 sec. Mode is changed to master mode.
Set Press once. Set item can be selected.
Master Press once. Display description is changed.
‘ RST (reset) key
Mode Keying Condition
Hold measured
value Press once. Measured value hold is cleared.
Set (set value
being entered) Press once. Set value is returned to previous
condition.
Set (set item
being selected) Press once. Setting can be finished (WRITE or
CANCEL).
Master Press once. Display description is returned to
previous condition.
Adjust detector Press once. Display description is returned to
previous condition.
2 1 3
SE T M A S
(8)
ENT
RST
SET MAS


‘