KROHNE H250 M8-M9-M10 EN - Manual (Page 44)

6
OPERATION
44
H250
www.krohne.com 04/2011 - 4000269302 MA H250-R02 en
6.2 Basic principles of operation
6.2.1 Functional description of the keys
6.2.2 Navigation within the menu structure
Navigation within the menu is by means of the → and ^ buttons. Pressing button → takes you
one menu level lower, ^ takes you one menu level higher.
If you are already located at the lowest level (function level), you can use the button → to go the
the change mode, which can be used to set data and values.
If you are located at the first level (main menu), you can use the ^ key to exit the menu mode and
return to the measuring mode.
→
Switch from measurement mode to menu mode
Switch to one menu level lower
Open menu item and activate change mode
In change mode: In change mode: In change mode: In change mode: Move the input cursor one position to the right; after the last digit the
input cursor jumps back to the beginning.
↑
In measuring mode: In measuring mode: In measuring mode: In measuring mode: Switch between measured values and error messages
Change between the menu items within a menu level
In change mode: In change mode: In change mode: In change mode: Changing parameters and settings; running through the available
characters; shifting the decimal point to the right.
^
Change one level up at the menu
Return to measuring mode with a query whether the data should be accepted
Table 6-2: Description of the opperation buttons
Measuring
operation
→ Main menu
↑
→ Sub-menu
↑
→ Function
↑
→ Edit
→ ↑ ^ ^ ^ ^
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
Table 6-3: Navigation menu structure
MA_H250_R02_en_269302_PRT.book Page 44 Tuesday, April 12, 2011 10:17 AM