KROHNE MAC 100 EN - Manual (Page 76)

8
TECHNICAL DATA
76
OPTISENS MAC 100
www.krohne.com 04/2011 - MA OPTISENS MAC 100 R01 en
Display and user interface Display and user interface Display and user interface Display and user interface
Graphic display LC display, backlit white
128 x 64 pixels
Note: ambient temperatures below -25°C / -13°F" may affect the readability of the
display!
Operating elements 4 push buttons for operator control of the signal converter without opening the
housing.
Operating menu The operation menu consists of the measuring mode and the menu mode:
Measuring mode: 4 pages (first and second measuring page with measuring
results, status message and trend diagram).
Menu mode: variety of main and submenus that allow to customise the device
according to the demands of the measuring point.
Operating and display languages English, German, (others on request)
Units Metric, British and US units selectable as required from lists.
Measuring accuracy
Reference conditions Temperature: 20°C / 68°F
Pressure: 1 bar / 14.5 psi
Maximum measuring error For further information refer to the manual of the relevant sensor.
Repeatability For further information refer to the manual of the relevant sensor.
Resolution Temperature: 0.1°C / 0.1°F"
For further information refer to the manual of the relevant sensor.
Long-term stability 24 hours: tested within accuracy definition
Temperature drift Tested within accuracy definition
Cable length variation Tested within accuracy definition
Operating conditions
Temperature Temperature Temperature Temperature
Ambient -15...+55°C / +5...131°F
Note: the manufacturer strongly recommends to protect the signal converter from
external heat sources such as direct sunlight as higher temperatures reduce the
life cycle of all electronic components!
Storage -40...+70°C / -40...+158°F
.book Page 76 Friday, April 1, 2011 4:59 PM