KROHNE MAC 100 EN - Manual (Page 7)

SAFETY INSTRUCTIONS
1
7
OPTISENS MAC 100
www.krohne.com 04/2011 - MA OPTISENS MAC 100 R01 en
1.2 Intended use
In combination with the different sensors of the OPTISENS 1000 series the MAC 100 measures
analytical parameters in water and waste water applications.
1.3 Certifications
The device fulfils the statutory requirements of the following EC directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
as well as
• EN 61010
• EMC specification acc. to EN 61326/A1
• NAMUR recommendations NE 21 and NE 43
DANGER!
Never install or operate the device in potentially explosive areas, it might cause an explosion that
can result in fatal injuries.
WARNING!
If the device is not used according to the operating conditions (refer to chapter "Technical data"),
the intended protection could be affected.
DANGER!
Never install or operate the device in potentially explosive areas, it might cause an explosion that
can result in fatal injuries.
CE marking
.book Page 7 Friday, April 1, 2011 4:59 PM