Operation – KROHNE MAC 100 EN User Manual

Page 51

OPERATION

OPTISENS MAC 100

www.krohne.com

04/2011 - MA OPTISENS MAC 100 R01 en

A6, analog outputs

A7...A16

Level

Designation / function

Settings / descriptions

Depending on the hardware setting this menu is applicable to the current outputs A/B/C, the limit switches R1/R2/R3

and the first line of the first measuring page.

A6.1

measurement

Value used for driving the current output C. You can answer the question

"use all outputs?" with the following options: no (exits the function using the

value only of current output C) / yes (exits the function copying the value to

all analog outputs).

A6.2

unit

Unit for the current output range, the class of the unit depends on the

measurement used at this current output (for further information refer to

function C5.7 "Units").

A6.3

range

Range of the main current output C of the device. You can answer the

question "use at all output?" with the following options: no (exits the function

using the value only of current output C) / yes (exits the function copying the

value to all analog outputs).

A6.4

time constant

Time constant of the current output C

The existence of the single menus depends on the hardware setting and the used sensor; refer to sensor manual for

further information.

.book Page 51 Friday, April 1, 2011 4:59 PM