KROHNE MAC 100 EN - Manual (Page 71)

OPERATION
6
71
OPTISENS MAC 100
www.krohne.com 04/2011 - MA OPTISENS MAC 100 R01 en
6.8 Timeout function
Menu mode
If the user does not press any key for 5 minutes and the device is not in the test mode, it
automatically returns to the measuring mode (i.e. the display shows one or more measuring
results).
Test mode
If the device performs a test on the local user interface (e.g. during the simulation function of a
current at the current output), the test run is terminated after 60 minutes. The device
automatically returns to the measuring mode (i.e. the display shows one or more measuring
results).
INFORMATION!
Independent of the mode (menu mode or test mode, see below), all changes done until an
automatic return are lost if this return happens!
.book Page 71 Friday, April 1, 2011 4:59 PM