In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 9)

9 WIN-SITU 4.0 USER’S GUIDE
0031510 rev. 003 11/04
2 GETTING STARTED
STEP 1: CONNECT THE
INSTRUMENT TO THE PC
1. Attach a communication interface
to the surface connector of the
instrument’s quick-connect cable.
2. Attach communication interface to
a PC’s standard RS232 serial port
(a serial cable, serial card, and/or
a null modem may be needed with
some PDAs).
STEP 2: LAUNCH THE
SOFTWARE
• Double-click the Win-Situ shortcut created on the
desktop during installation.
• Or double-tap the Pocket-Situ 4 shortcut on the
PDA Start Menu.
Communica-
tion interface
Serial port
PDA
Quick-
Connect
submersible
cable
miniTROLL
or
TROLL 9000