In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 76)

76 SECTION 11: FLOW-SENSE WIZARD
rev. 003 11/04
• Total well depth
• Depth to water level, referenced to a benchmark
• Depth to top of screen and placement of pump intake, referenced to
the same benchmark
• Screen length
• Pump model & type
• Tubing type, inner diameter & length
• Final pumping rate (in mL/min)
• Final stabilized drawdown from static water level, measured with a
tape or other measurement device after the final pumping rate has
been established
• Connect the MP TROLL 9000 to the PC’s COM port
• Install Microsoft® ActiveSync™ on a desktop or laptop PC to enable
transfer of files to and from a PDA. ActiveSync must be installed before
connecting the computers for the first time.
OPTIONAL PREPARATION
• Text entry on a PDA in the field can be tedius. To simplify the task, you
may wish to run the Flow-Sense Wizard from Win-Situ on a full-sized
PC in the office to prime the software with representative values. Then
use ActiveSync to copy the “templates” created in this way to a PDA on
which Pocket-Situ is installed. See
“Priming the Flow-Sense Wizard in
the Office” at the end of this section.