In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 70)

70
0031510 rev. 003 11/04
INSTALLATION
The In-Situ synchronization utility PocketSync can automatically install or
update Pocket-Situ on a connected RuggedReader or other handheld
PDA. It also transfers files between the connected PDA and a desktop PC
easily and automatically. the Win-Situ/Pocket-Situ CD-ROM.
You will need—
• Microsoft® ActiveSync® synchronization software installed on your
desktop computer. ActiveSync came with your PDA, or may be
obtained from the Microsoft web site (www.microsoft.com/
windowsmobile)
• An In-Situ RuggedReader or other handheld PDA running Microsoft
Pocket PC, Pocket PC 2002, or Pocket PC 2003, which is also known
as Windows Mobile 2003
• At least 16 megabyte capacity for storage of Pocket-Situ data on the
PDA (SD card, CF card, or the device’s permanent storage)
• The Win-Situ/Pocket-Situ installation CD-ROM
1. Install Microsoft ActiveSync on the desktop PC.
2. Connect the computers. If this is
your first connection, follow the
prompts in ActiveSync to set up a
Standard partnership or a Guest
partnership. PocketSync can work
with either type of partnership.
SECTION 10: POCKET-SITU
TIP: Windows 95
and Windows NT
do not support
USB. If using a PC with
either of these operating
systems, you will need to
connect using the 9-pin
serial communication ports
on each computer. An
optional serial communica-
tions cable will be required.
2