In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 8)

8
0031510 rev. 003 11/04
SECTION 1: INTRODUCTION
INSTALLATION
WIN-SITU
The Win-Situ CD-ROM contains an automatic setup program to install
Win-Situ to your local hard drive.
1. Insert the Win-Situ 4 CD in the appropriate drive of your computer.
• If the CD-ROM drive is set to Auto-Play, the installation program will
start automatically.
• If necessary, choose Run from the Windows Start Menu and type
D:\Setup, where D is your CD-ROM drive letter.
2. Follow the instructions to install the program to your local hard drive. A
shortcut will be created on the desktop:
POCKET-SITU
To install Pocket-Situ on a handheld PDA:
1. Be sure Win-Situ 4 and Microsoft ® ActiveSync ™ are installed on the
desktop PC, and that a partnership has been established between the
desktop computer and the PDA. For more information on setting up
partnerships in ActiveSync, see your ActiveSync documentation.
2. Install Pocket-Situ on the desktop PC from the Win-Situ/Pocket-Situ
installation CD. Install it to the folder where Win-Situ is installed.
3. When ActiveSync detects the connection, the PocketSync utility will
start automatically. When prompted to install Pocket-Situ on the
connected PDA, answer Yes. For more detailed installation information
see
Section 10 of this manual. For more information on the
PocketSync utility, see PocketSync’s on-line help.
TIP: Be sure
Microsoft
ActiveSync is
installed on your desktop or
laptop PC before attempting
to install Pocket-Situ. You
will need to connect the
computers and set up a
partnership in ActiveSync
before you can install
Pocket-Situ on a PDA.
TIP: The CD
menu option is
“Install Pocket-
Situ,” but you are actually
installing PocketSync to
your desktop computer in
preparation for installing
Pocket-Situ on a connected
handheld PDA.