7 profiling, Profiler features, Section 7 has details on profiling – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual

Page 39: Pane. refer to, Section 7

WIN-SITU 4.0 USER’S GUIDE

0031510 rev. 003 11/04

7 PROFILING

The Profiler delivers instant real-time readings on all available channels.
Profiler readings are continuously updated as long as the Profiler is
running. This provides a convenient means for quick characterization of
surface waters using a hand-held controller running Pocket-Situ.

PROFILER FEATURES

• Auto detect—the software automatically identifies all properly

connected sensors

• Continuously updated readings from all available channels

• Optional data logging to the connected PC

• Optional start device in Profiler mode

• Optional selectable Profiler interval (2-60 seconds)

You will need—

• miniTROLL or MP TROLL 9000

• Quick-Connect Submersible cable
• ComIT or comm cable

• PDA running Pocket-Situ

TIP: Pocket-Situ
screens are shown
in this section.

Win-Situ on a laptop PC
may also be used for
Profiling.