Using the flow-sense wizard, Start the software launch the flow-sense wizard – In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual User Manual

Page 77

Text mode
Original mode

SECTION 11: FLOW-SENSE WIZARD

rev. 003 11/04

USING THE FLOW-SENSE WIZARD

START THE SOFTWARE

Launch Win-Situ or Pocket-Situ.

If you have not used the software before, take a moment to specify a
connection type, COM port, and baud rate. Refer to Step 3 in Section 2
(Getting Started) of this guide for specifics.

LAUNCH THE FLOW-SENSE WIZARD

Select one of the following ways to launch the Flow-Sense Wizard:

• Select the Flow-Sense Wizard from the Tools menu in Win-Situ (not

available in Pocket-Situ)

• Select the Flow-Sense Wizard in the Navigation tree. Click or tap Start

in the Information pane.

Select the Wizard

Click Start

TIP: Win-Situ
screens are
illustrated here.

The Pocket-Situ interface is
similar, with the Navigation
tree at the top of the screen
and the Information pane
below it.