In-Situ Win-Situ 4 / Pocket-Situ 4 Operators Manual - Manual (Page 15)

15
0031510 rev. 003 11/04
YOUR NEXT SESSION
Each time you start Win-Situ or Pocket-Situ, the site and the connection (if
any) saved in your last session are displayed in the Navigation tree.
To connect:
1. Select the connection.
2. Click Find. Or double-click the connection.
Win-situ will locate the device and display it in the Navigation tree.
Note: If the instrument is operating on battery power and the remaining
battery capacity is at 10%, a warning to replace the batteries will be
displayed before the device appears in the Navigation tree. Replace
the device’s batteries as soon as possible.
SECTION 2: GETTING STARTED
1
2
TIP: To start Win-
Situ from Windows
Explorer, double-
click a Win-Situ file in the
folder where Win-Situ is
installed. Win-Situ 4 files
have a .WS4 extension.
If the device’s
remaining battery
capacity is 5% or
less, the device may not be
displayed in the tree.
Replace the batteries
before continuing.