Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 82)

GPS User’s Manual
78
• The Delta values represent the shift from the TDS
Localization stereographic zone false northing and easting
(100000.0, 100000.0) to the local system (5000.0, 5000.0).
• Tap $FFHSW to apply the solution. You are prompted that this
will update the plane coordinate of all GPS points. Tap
2. to
apply the localization solution to all GPS measured points.
Your new autonomous base point’s local coordinates will also
be calculated.
• You are prompted to store this Localization site in the
database. Give the site a name and tap
2..
• Upon exiting the Solve Localization wizard, tap &ORVH on the
Projection information screen to return to the Control Points
screen.
7. Check points.
• Select Point
3 and tap
&KHFN. Results should be perfect. In
the field you would expect check points to be within the
measurement precision of your GPS system.
• Tap $FFHSW and review the results on the Results tab.
• Tap &ORVH to return to main menu.
8. Data Collection
• From the Survey Menu, tap 'DWD &ROOHFWLRQ. Start at point 301
and collect some GPS measurements. You can tap
3RLQW to
measure one point at a time. You can tap
2IIVHW to measure
an offset from a reference point. You can tap
)HDWXUH to
collect many points either automatically by an interval, or
manually.
9. Move the base to a point in the coordinate file measured with
GPS.
• From the Survey Menu, go to %DVH 6HWXS, tap 6HWXS, select
point 1 and tap
1H[W!.
• Measured coordinates for Point
1 are recalled and ready to
6(7.