Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 118)

Survey Menu – RTK
23
Position
The Position card displays your current position as well as your
course and speed information if you are moving.
Position : displays your current coordinates.
Solution : (see the Receiver card on Page R-20.)
Heading : displays your course over ground if you
are moving.
Speed : displays your horizontal speed over
ground if you are moving.
Base Setup
6XUYH\ %DVH 6HWXS
The Base Setup screen is used to set the base point in Survey Pro and
to configure the receiver to begin broadcasting differential
corrections.
Note: If you are in Manual Mode , you can set the base in Survey Pro
for the purposes of doing GPS calculations without having to connect
to a receiver.
When you tap the Base Setup menu item, the
Current GPS Base Station information screen
is displayed.
Base Point : displays the current base point
name, if set.
Base Status : displays the status of the base.
Base Latitude : displays the current latitude of
the base point set in Survey Pro.
Base Longitude : displays the current
longitude of the base point set in Survey Pro.