Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 107)

GPS Reference Manual
12
Note: This function only works during post processing data collection
using the session screen. For status during simultaneous post
processing and RTK data collection, refer to the status screens or the
RTK status bar.
Receiver Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV«
The receiver Settings contains several settings specific to the selected
manufacturer and model of receiver. Some of these setting will vary
compared to what is displayed here.
Receiver Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« 5HFHLYHU
The Receiver card is used to view the settings
for communication between the data collector
and the receiver.
Brand : displays the receiver manufacturer
selected in the Receiver Settings screen.
Model : displays the receiver model selected in
the Receiver Settings screen.
RTK Correction Format : is the format for
communication between the base and rover.
Serial Port (Data Collector) : displays the COM
port on the data collector used to communicate with the receiver.
Serial Port (GPS Receiver) : displays the COM port on the receiver
used to communicate with the data collector.
Baud Rate : displays the speed of the data collector’s COM port. This
speed must match the baud rate set in the receiver, which can be set
from the Receiver Communications screen, opened by tapping the
&KDQJH« button.
Parity : displays the communications parity setting.