Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 164)

Survey Menu – Post Processing
69
Remaining : displays the time remaining in the current session if a
session is in progress. If your receiver does not monitor sessions, the
Remaining field is not displayed.
Free Memory : displays the amount of memory remaining in the
receiver internal storage card.
HDOP : displays the Horizontal Dilution of Precision. It is a measure
of the geometrical quality of the solution. DOP has no units and
lower numbers indicate better solution geometry.
VDOP : displays the Vertical Dilution of Precision. It is a measure of
the geometrical quality of the solution.
Satellites Used : displays the number of satellites recording raw data.
Satellites Locked : displays the number of satellites tracked by the
receiver.
Start Static Rx
6XUYH\ 6WDUW 6WDWLF 5[
The Static Rx Recording screen is used to start or
stop recording in a static receiver’s internal
memory and change the recording interval or
antenna height.
6WDUW 5HFRUGLQJ : Opens a file on the receiver’s
internal memory and begins recording GPS raw
data for post processing. Next, the Static
Receiver Session screen is opened (Page R-71)
where you need to enter the station information
and start mark the beginning of the occupation.
6WRS 5HFRUGLQJ : Stops recording GPS raw data
for post processing on the receiver’s internal memory and closes the
open file.
&KDQJH 6HWWLQJV« : opens up the Post Process card of the Job,
Settings screen.