Spectra Precision Survey Pro CE v3.60 GPS User Manual User Manual

Page 52

GPS User’s Manual

6. Examine the results. The

Rotation

is the negative of meridian

convergence between the central meridian of the selected map
projection zone and the base point.

7. If you set your base up on a known point, then the base station

coordinates are already entered into the

Base Station Local

Coordinate

fields. Tap

6ROYH! to calculate the localization

parameters. Tap

$FFHSW to finish setup and return to the

Projection screen.

8. If you set your base up on a new point, you need to tap

2FFXS\ &RQWURO. You will be prompted to make sure your

Scale

and

Rotation

are correct before the Control Points screen is

opened. You need to select and occupy a single control point.
When you are done, tap

$FFHSW to return to the Solve Localization

screen and the calculated coordinates are returned to the

North

and

East

fields.

9. Tap

6ROYH!. Examine the results and tap $FFHSW when you are

done. You will be prompted to name the new localization site and
save the record in the database.