Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 109)

GPS Reference Manual
14
$XWR 'HWHFW : checks the receiver at all allowable baud rates to find
the current receiver communication settings. If this function
succeeds, Survey Pro is set to communicate at the baud found on the
receiver.
Base Radio Settings
-RE 6HWWLQJV 5HFHLYHU 5HFHLYHU 6HWWLQJV« %DVH 5DGLR
The Base Radio Settings card is used to view and configure the
settings for the radio used with the base receiver.
Baud Rate : displays the baud rate the receiver
will use to communicate with the radio.
Parity : displays the parity the receiver will use
to communicate with the radio.
Serial Port : displays the serial port the receiver
will use to communicate with the radio.
&RQILJXUH 6HULDO : opens the Radio
Communications screen (Page R-15), where
you can change the receiver settings for radio
communications.
Channel : displays the last radio channel when applicable.
Sensitivity : displays the last radio sensitivity when applicable.
Mode : displays the last radio base mode when applicable.
&RQILJXUH 0RGHP : establishes communication with the radio
firmware and opens the Radio Settings screen (Page R-15), where you
can change the radio channel and sensitivity settings.