Stake dtm, Dtm gps shot – Spectra Precision Survey Pro CE v3.60 GPS User Manual User Manual
Page 181
GPS Reference Manual
86
Stake DTM
6WDNHRXW 6WDNH '70
The Stake DTM routine allows you to stake an area and get cut / fill
and volume information based on a reference DTM or specified
elevation datum.
The first screen of this routine is similar to the conventional method,
except that the
%DFNVLJKW button is replaced with a 6HWXS +5 button
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See the conventional
reference manual for details.
DTM GPS Shot
6WDNHRXW 6WDNH '70 6ROYH
The DTM GPS Shot screen displays all
relevant information on the current rover
position and a graphic that shows the rover
location, the occupied TIN triangle, and the
rectangular DTM corners of the DTM
boundary.
Note: the DTM boundary corners and TIN
triangle may not be visible depending on the
current scale of the screen.
2&&83<,1* / 529,1* : switches from
ROVING
to
OCCUPYING
mode. When ROVING, the receiver is in dynamic mode and will
calculate your position as you move to the point. When
OCCUPYING,
the receiver is switched to static mode (depending on settings) and
will calculate the most precise position for the staked point.