Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 146)

Survey Menu – RTK
51
Vertical Card
The Vertical card is used to manually enter the five parameters of the
vertical localization solution.
Slope N : is where you enter the slope of the
inclined plane along the local north grid axis
in parts per million.
Slope E : is where you enter the slope of the
inclined plane along the local east grid axis in
parts per million.
Separation : is where you enter the
separation between the inclined plane and
the local elevation.
Origin N / E : is where you enter the local
origin (north,east) of the inclined plane.
6ROYH ! : updates the localization solution using the values entered
on the Horizontal and/or Vertical cards.
Localization Calculator
6XUYH\ 3URMHFWLRQ 6ROYH /RFDOL]DWLRQ &DOFXODWRU!
This sub section describes a feature available only in Ground – TDS
Localization mode.
The Localization Calculator screen is used to enter the horizontal
localization parameters using the pre Survey Pro 3.5 procedure.
Scale : is where you enter the scale factor used
to transform distances on the localization
mapping plane to your project coordinate
system.
Note: Using Survey Pro 3.5, the localization
scale should be very close to 1.0. See the
user's manual for a more detailed explanation
of Survey Pro 3.5 localization scale values.